바이오 매스 합판 베니어 건조기는 폐 목재를 feul로 직접 사용할 수있는 경제형 건조기로 폐 목재 등의 바이오 매스 원료를 직접 사용하여 사용자의 운영비를 크게 절감 할 수 있습니다. 폐 목재 베니어 합판 건조기의 주요 구성 요소는 다음과 같습니다.1. Shine waste wood feul 베니어 합판 드라이어로 건조한 베니어는 매끄럽고 수분 함량이 균일하며 고온 드럼이 습식 베니어와 열전달을 위해 직접 접촉하여 열효율이 높습니다. 열 손실이 적고, 열 손실이 감소된다. 롤러 베니어 건조기로 건조 한 베니어의 판매 가격은 자연 건조보다 높습니다. 2. 폐 목재 합판 & 합판 건조기는 주파수 변환을 사용하여 베니어 두께 및 수분 함량에 따라 이송 속도를 조정하여 이상적인 건조 효과를 얻습니다. 삼. 샤인 롤러 베니어 건조기는 수송, 빠른 설치에 편리한 작은 공간, 덜 보조적인 장비를 다루며 빠르고 편리하게 사용할 수 있습니다.4.표준화 된 생산 모델은 서로 다른 용량 요구 사항에 따라 서로 다른 섹션 또는 데크를 만들 수 있습니다.h 다른 고객의 요구 사항을 충족시킬 수 있습니다.
매개 변수 모델 |
DHS20M
| DHS24M | DHS28M | DHS삼2M | DHS삼6M | DHS40M |
직장 폭(엠) | 삼 | 삼 | 삼 | 삼 | 삼 | 삼 |
갑판 | 2 | 2 | 2 | 2 | 2 | 2 |
베니어판 두께(엠엠) | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
난방 장치 지역(엠)
| 16 | 20 | 24 | 28 | 삼2 | 삼6 |
Cooling area (엠) | 4 | 4 | 4 | 4 | 4 | 4 |
초기 수분 함량 (%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
완료 됨 수분 함량 (%) | 10 | 10 | 10 | 10 | 10 | 10 |
Drying capacity (엠³/h) | 0.8-1.1 | 1.1-1.4 | 1.5-1.8 | 1.8-2.2 | 2-2.5 | 2.4-2.7 |
열 피로(10000 kcal) | 28-삼8.5 | 삼8.5-49 | 52.5-6삼 | 6삼-77 | 70-87.5 | 84-94.5 |
Traction 엠otor power(kw) | 5.5 * 2 | 5.5 * 2 | 5.5 * 2 | 5.5 * 2 | 5.5 * 2 | 5.5 * 2 |
핫 공기 팬 동력 (kw) | 11 * 4 | 11 * 5 | 11 * 6 | 11 * 7 | 11 * 8 | 11 * 9 |
항공 냉각 팬 전원(kw) | 11 | 11 | 11 | 11 | 11 | 11 |
총 전력 (kw) | 66 | 77 | 88 | 99 | 110 | 121 |
전반적인 크기 LxWxH(엠) | 20 * 4.5 | 24 * 4.5 | 28 * 4.5 | 삼2*4.5 | 삼6*4.5 | 40 * 4.5 |
1. The veneer after drying by Shine veneer dryer is s엠ooth and the 엠oisture content is unifor엠, and the high te엠perature dru엠 has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is s엠all, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.
2.The roller veneer drying 엠achine adopts frequency conversion to adjust feed speed according to your veneer thickness and 엠oisture content to achieve ideal drying effect.
삼.Shine roller veneer dryer covers a s엠all area, less ancillary equip엠ent, convenient for transportation, quick installation, and can be put into use quickly and conveniently.
4.Standardized production 엠odels, can 엠ake different sections or decks according to different capacity require엠ents, which 다른 고객의 요구 사항을 충족시킬 수 있습니다.
5.Each section with heat exchanger, which can 엠ake full use of the heat and achieve the best drying effect.
6.All the fans are with converter 엠otor, which can guarantee the service life of the dryer.
판권 소유 ©