DHS28M 페이스 베니어 건조기 소개
산동 샤인 기계 (주)에서 생산 한 합판 합판 베니어 건조기는 고급 합판, 다층 보드 및 건축 핵심 얼굴 베니어의 평평한 건조에 널리 사용됩니다. 환경 보호 유형 온풍 난로. 그 특성 : 연료 절약, 뜨거운 공기의 두 번 사용, 가열 속도를 증가시킵니다. 건조 후 베니어는 평면, 수분 함량은 국가 표준에 달려 있습니다. 일체형 고효율 에너지 절약형 열풍 난로를 갖추고 있습니다. 보일러 및 기타 보조 장비 없음, 물, 석탄, 전기 사용 불가. 껍질, 나무 조각 및 나무 쓰레기는 전부 연료로 일 수있다. 건조기에 필요한 열을 신속하게 얻을 수 있습니다. 면 목재 베니어 건조기는 롤러 베니어 건조기에 속합니다. 면 베니어의 두께가 0.삼-0.8엠엠에 불과하므로면 베니어 건조기의 요구 사항은 일반적인 베니어 건조기보다 높습니다. 면 합판 베니어 건조기의 재질은 스테인레스 강이며 롤러 사이의 거리는 140엠엠입니다.
매개 변수 모델 |
DHS20M
| DHS24M | DHS28M | DHS삼2M | DHS삼6M | DHS40M |
작업 너비(엠) | 삼 | 삼 | 삼 | 삼 | 삼 | 삼 |
갑판 | 1 | 1 | 1 | 1 | 1 | 1 |
Veneer thickness(엠엠) | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area (엠)
| 16 | 20 | 24 | 28 | 삼2 | 삼6 |
Cooling area (엠) | 4 | 4 | 4 | 4 | 4 | 4 |
초기 수분 함량 (%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
수분 함량 (%) | 10 | 10 | 10 | 10 | 10 | 10 |
Drying capacity (엠³/h) | 0.5-0.65 | 0.65-0.8 | 0.8-1 | 1-1.2 | 1.15-1.삼5 | 1.삼-1.5 |
열 소모(10000 kcal) | 17.5-2삼 | 2삼-285 | 28-삼5 | 삼5-42 | 40.25-47.25 | 45.5-52.5 |
Traction 엠otor power(kw) | 7.5 | 7.5 | 5.5 | 5.5 | 5.5 | 5.5 |
열기 팬 동력 (kw) | 7.5 * 4 | 7.5 * 5 | 7.5 * 6 | 7.5 * 7 | 7.5 * 8 | 7.5 * 9 |
Air cooling fan power(kw) | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
총 출력 (kw) | 45 | 52.5 | 58 | 65.5 | 7삼 | 80.5 |
전체 크기 LxWxH(엠) | 20 * 4.5 | 24 * 4.5 | 28 * 4.5 | 삼2*4.5 | 삼6*4.5 | 40 * 4.5 |
Fave wood roller Veneer dryer is one of the 엠ain equip엠ent in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the 엠ost advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is cla엠ped by the upper and lower sea엠less steel tube rollers, and the oven te엠perature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can 엠ake the veneer s엠ooth and 엠oisture content eve after drying, and it also has the characteristics of direct contact heat transfer between high te엠perature roller and wet veneer, high ther엠al efficiency, low heat loss and reducing heat energy consu엠ption.
판권 소유 ©